1. Front seat:
(1) the car seat cover
purchased should be clearly separated from the front and back and left and
right first. It can be aligned perfectly by looking at the driver's seat facing
in and the airbag hole facing out.
(2) when the
installation of the left and right sides of the distinction between the water
pipe under the head pad, the car water pipe is on the outside of the seat and
then sewn on the plastic hose. Both sides of the rubber belt, with iron wire
and other fasteners to tie, otherwise it is easy to go through the shell, and
then use the iron hook in front of the seat is the bag under the belt, many
people will adjust the seat looser.
If there are pleats,
it is because they have not been tensioned. In the process of installation,
they need to be tensioned repeatedly for many times to completely adjust the
two sides until they are close to each other.
2. Back seat:
(1) most cars just
lift into the back seat and slowly turn it into a corner. During the period
must adjust the seat to the appropriate position, and then slowly buckle, if
the word is because the position is not adjusted correctly to adjust again.
(2) if all around is
hose we can choose to cover directly, conduit is pressed into aperture directly
OK. If the back seat is a special seat cover, it has detailed instructions on
the process, collection of the model, cross-check the model of course you are a
local luxury can buy, because the price is quite "optimistic".
3. Summary before and
after:
(1) due to the
particularity of the car cushion cover, the installation process should be cut
out meticulously, put into the gap to be accurate. In order to avoid rework in
the process of secondary damage, leading to the purchase of sadness. I hope you
can use the above steps in practice and not be brainwashed blindly.
(2) and before you buy
different brands and different types of car seat covers, you can first look at
the installation instructions they give you, some are simple paste, some are
complicated clipping. In addition, it is not easy to choose slippery materials
in the process of selection, which will bring a lot of traffic hazards.
(3) choose the right
one and feel comfortable no matter how troublesome the installation